Does WD 40 Remove Tint Glue ?

WD40 Multi-Purpose Rust Remover is one of the most popular lubricants, which has been widely spread all over the world for its amazing versatility in the home, car and many things in daily life. It is originally produced by the American company WD-40, and its main function is to remove rust, but it can be used in many other things. In this article, we will learn about the most famous and most important uses of WD40 rust remover, and we’ll answer the question: does WD 40 remove tint glue.

Does WD 40 Remove Tint Glue ?

Absolutely yes! WD 40 multi use product can help to weaken the tint glue bonds very easily. Adding to this the fact that WD 40 will not harm the glass, this product is a great alternative of acetone for removing tint glue from glass.

The way to remove tint glue with WD 40 is as simple as, spraying the product on the glued spot, give it 1 minute to penetrate the glue and finally scrap it using a soft cloth.

WD 40 can be used on strong adhesives as super glue effectively as well. So you don’t need to worry about dropped glue on the floor or other surfaces, as WD 40 can be used on a variety of materials such as plastic, wood, aluminium, steel, leather, glass, paint and much more.

Surfaces On Which WD 40 Can Be Used

According to the manufacturer, the multi-use WD40 rust remover can be used on almost all surfaces, as it is safe to use on wood, plastic, rubber and metal, even painted (painted) surfaces, it can be used without harming the paint. However, WD40 should be avoided on polycarbonate and polystyrene plastic surfaces.

One other thing to mention is that WD 40 is acid-free, so you don’t need to worry about any corrosions that can be expected when using on stone and granite surfaces. Also, WD 40 is Non-flammable, non-corrosive, non-abrasive and low-odor product.

5 Essential Uses Of WD 40 Multi Use Product

  • Lubrication: WD40 contains lubricating components that are widely distributed in all moving parts (mechanical).
  • Penetration: The versatile WD40 loosens the bonds associated with rust with metals and releases those rusty metal parts.
  • Protection: The WD40 rust remover can protect metal surfaces, thanks to its anti-corrosion and rust-resistant components, thus protecting metal surfaces from moisture that causes rust.
  • Removal: It removes and cleans surfaces of dirt, dust and grease, as it can be used to clean tools, equipment and dirty car parts.
  • Moisture removal: It replaces the moisture present in tools and surfaces. Thus it is used to remove moisture from electrical circuits.

Manual Self-Removal Of Tint Glue

Most modern types of tinting of car windows is reduced to a simple application of a special adhesive film from the side of the passenger compartment. The first way to quickly remove such a film for your car is to remove it using various tools that are usually accessible to any driver.

The mechanical version of Tinting is in high demand when a traffic policeman asks to clean the glass in his presence. This doesn’t happen often, but it does. To do this, you need some kind of small tool. You can choose anything from a regular paper knife to a plastic scraper.

First, you need to lower the glass a little, and then move it over the edge with the help of the selected tool. Grasping the edge with your own hands is quite simple. Then it’s a technical matter – just pull the film down so it peels smoothly off the glass surface.

Avoid cheap tinting films which when removed, can actively tear in different places. Each remaining piece should be peeled off as described above. However, if it cannot be removed smoothly, you can grab the tip and shake it sharply. This option is also effective. And then no one will tell you exactly how it is more correct, because the result is always the same – the pigment is completely removed, leaving behind a smooth and undamaged surface.

The main thing in this task is to avoid using durable objects that can scratch the glass. Given that colored areas are usually not easy to get rid of from tinting, it may be necessary to try to bind the same area of ​​the film several times. Do this very carefully, remembering that if you press too hard or accidentally jump the tool, there is a possibility of serious damage to the glass (scratching and even breaking).

How To Remove Tint Glue With Soap And Water

If you intend to remove the tint of your car windows and have a certain amount of time, the simplest and best way is to use a regular soapy solution or detergent.

The vast majority of adhesives used to tint films are based on silicone, which means that leveling their properties does not require the use of any complex chemical solutions. Soap will be enough.

An ordinary newspaper, will simplify the task and speed up the matter – it is enough to wet the newspaper with soapy water and leave it on the tinted glass for about an hour and a half, not forgetting to periodically wet it with our solution again. As a result, silicone glue will peel off itself from the surface of the window.

Remove The Tint Glue With A Regular Hair Dryer

Many people know about this method – removing the tint film with a hair dryer. This is a very effective, and most importantly, time-tested option for eliminating tint glue on your car windows.

It is ideal to have a household hair dryer on hand, but in fact, the usual dryer with which you dry your hair is often enough. The principle of this method is very simple – you heat the film by pulling it out of the window in parallel. True, it is worth considering that you should not heat the film too much, since it can dissolve and stick more strongly to the glass. For quick removal, you will also need some kind of tool, as in the first case, to hook the edge of the film and pull it down to it.

Removing Tint From The Rear Windshield Of The Car

Despite the fact that most drivers somehow distinguish the rear window from the rest, both in terms of applying a tint film and in terms of removing it, the operations do not differ from each other. The only thing worth understanding is that cleaning the rear window will take twice as long as cleaning the side windows. It is also important that several wires from the heating system are setting in the back part of your car – they cannot be damaged in any way, so be careful.

Leave a Comment